Skip to main content

📞 Installing the Chrome Extension

The TalentLynk Chrome extension lets you call and message contacts without leaving your CRM - saving time and keeping all communication tracked inside TalentLynk.

Steps:

  1. Make sure your Google Chrome or Microsoft Edge browser is up to date.

  2. Close all CRM tabs (e.g. Bullhorn, Vincere, Loxo, JobAdder) before installing.

  3. Visit the Chrome Web Store extension page, or open the Web Store and search for TalentLynk.

  4. Click Add to Chrome / Edge → Add Extension.

  5. You can optionally turn on sync if you use multiple laptops with the same Chrome profile.

Check it’s working:

  1. Open your CRM (for example, Bullhorn).

  2. Navigate to a candidate or hotlist.

  3. You should now see the TalentLynk logo beside each phone number.

  4. Click the logo to make a call directly through TalentLynk.

✅ If you see the icon next to phone numbers, your extension is active and ready to use.

Pin the extension to the toolbar

  1. Click Chrome's Extensions button, the puzzle piece near the address bar.

  2. Find TalentLynk in the list.

  3. Click the pin next to TalentLynk. Its logo now stays in your toolbar.

Now you can open the TalentLynk side-panel on any supported CRM contact page with one click:

With the side-panel open, you should see something like the screenshot below:

Updating the extension manually

Extensions auto-update every few hours. If that takes too long or you want to immediately get an update, go to the Chrome extensions page (chrome://extensions/), enable "Developer mode" in the top right corner. Then, you should see an "Update" button:

Note that will update all your extensions at the same time. To update only TalentLynk, you can remove and re-install it from the Web Store page.

Below you can see examples of how the Click-to-Call extension will show up in different CRMs:

Bullhorn

Vincere

Next Step
Previous Step

Related Articles
Did this answer your question?